新闻动态
行业动态
公司新闻
联系我们
余姚市阳明灯饰有限公司

地址:浙江省余姚市民银工业区

中国浙江省余姚市
销售

电话:0086-0574-22222345 ...
现在联系
首页 > 新闻动态 > 行业动态 > What are the reasons for the popularity of lawn lights? How to prolong the service life of lawn

What are the reasons for the popularity of lawn lights? How to prolong the service life of lawn

Lillian 2022-04-20 15:40:41

1, lawn lamp, lawn lamp price is reasonable, the traditional kind of street lamp installation procedures are more complex, to lay the circuit and so on, and the consumption of electricity is relatively high, and the use of large wattage street lamp cap, not only make the light is dim, but also not conducive to the lighting of the city.  

2, the price of lawn lamp is uneven, the price is about two hundred yuan to one thousand yuan, compared with the traditional street lamp, the price is much cheaper.  Street lamp prices are not uniform in addition to its different materials, but also the choice of different brands.  For consumers, the brand is also a guarantee of quality.  Most lawn lamps illuminate for eight to nine hours on a full charge, so use this as a reference to the quality of your lawn lamp.  In the selection of street lights to take into account the installation of the road section, different road sections, the environment is not the same, so to choose the specifications are not the same.  For example, the width of rural roads is less than 10 meters, most of which are between four and six meters, so the wattage of the lamp holder should be able to shine on the road surface of this width.  

3. The price of lawn lamp is relatively energy saving and environmental protection, and the installation procedure is simpler than the traditional one. At the same time, there is no need to lay a very complex circuit.  


4, lawn lamp working principle: the lawn lamp in the daytime under the control of intelligent controller, solar panels through the sun's irradiation, absorption of solar light and converted into electricity, daytime solar battery module to charge lithium battery, lithium battery at night to provide power to the LED light source power, lighting function.  The DC controller can ensure that the lithium battery will not be damaged due to overcharge or overdischarge, and has PIR human body induction, light control, time control, temperature compensation, lightning protection, reverse polarity protection and other functions.





1. Check the wiring of the solar street lamp circuit system regularly to avoid loose wiring.  Check the grounding resistance of the solar street lamp.  

2. The batteries matching the solar cell components should be used in strict accordance with the application and maintenance methods of the batteries.  

3. The lighting surface of the solar cell module should be kept clean from time to time. If there is dust or other grime, rinse with clean water first, and then gently wipe the water stains with clean gauze.  Do not wash and test with hard or corrosive solvents.  

4, in case of strong wind, heavy rain, hail, snow, etc., measures should be taken to maintain the solar cell module from damage.  

5. After strong wind, heavy rain, heavy snow or rainy season, you must immediately check whether the panel moves, whether there is water or water in the control room and battery box, and pay attention to whether the equipment works normally after thunderstorms, and whether the charge and discharge controller is damaged.